Furniture Fire Safety in Ireland: What Changed in 2026?
Author
Paddy McDonnell
Date Published

Key Points
- In July 2026, the Republic of Ireland revoked its 1995 fire safety Order for domestic furniture.
- For seating already in use, the starting points are its condition, its location and the premises fire risk assessment.
- Use the fire risk assessment, relevant premises requirements and applicable sector guidance to establish the evidence required.
In July 2026, the Republic of Ireland revoked its 1995 fire safety Order for domestic furniture. Consumer furniture must still be safe. For a nursing home, the change alone is no reason to replace the chairs already in the lounge.
If a supplier quotes for a wipe-clean chair, check what was tested. If the report describes the same model in a woven fabric, ask for evidence that covers the finish and filling on the order. For chairs already in use, start with their condition, where they are used and who uses them.
What Changed in July 2026?
S.I. No. 357/2026 revoked the Industrial Research and Standards (Fire Safety) (Domestic Furniture) Order 1995. The instrument was signed on 22 July 2026. Notice of its making appeared in the official gazette on 24 July. Read the revocation instrument.
The former Order set fire-performance and labelling requirements for furniture within its scope. Its definition principally covered furniture ordinarily intended for use in a dwelling. If a purchasing document still cites the Order, review that reference before issuing the next invitation to tender. Keep any separately justified performance requirement and identify the evidence a supplier must provide to meet it. Read the former Order, including its definitions.
On 24 July 2026, the Department of Enterprise, Tourism and Employment explained that the change aligns Ireland with the EU General Product Safety Regulation (GPSR), which has applied since 13 December 2024. The Department said businesses could continue supplying existing furniture lawfully, subject to the GPSR and other applicable requirements. That concerns goods being supplied. For seating already in use, the starting points are its condition, its location and the premises fire risk assessment. Read the Department's announcement.
What Does the Current Product-Safety Framework Require?
Article 5 of Regulation (EU) 2023/988 requires economic operators to place or make available on the market only safe products. Article 6 identifies factors relevant to safety, including:
- product design
- foreseeable use with other products
- instructions
- and the users exposed to risk.
It expressly addresses vulnerable consumers, including children, older people and people with disabilities. General Product Safety Regulation, Articles 5 and 6.
Article 3(1) helps explain why the name on the invoice cannot settle the question. A product supplied as part of a service can fall within the definition where it is intended for consumers or is likely to be used by them under reasonably foreseeable conditions. A hotel, for example, may buy a sofa for guests to use. Establish the intended users and supply arrangement when deciding which product rules apply.
For the premises decision, consider what the supplier knows and what only local management can establish. The supplier can identify the model, construction and supporting test evidence. Management knows whether the proposed sofa will sit in a staff office, by a bedroom door or in a lounge where people need help to evacuate. Record both parts of the decision before agreeing the specification.
Does This Change the Duties of the Person Managing a Building?
Premises duties continue to apply. For premises within section 18 of the Fire Services Act 1981, the person having control must take reasonable steps to guard against an outbreak of fire, provide reasonable fire safety measures and appropriate procedures, and ensure those measures and procedures are applied. Section 18(2) also addresses the safety of people on the premises in the event of fire, as far as is reasonably practicable. Section 29 of the Licensing of Indoor Events Act 2003, which substituted section 18(2).
At a place of work, section 19 of the Safety, Health and Welfare at Work Act 2005 requires the employer to identify hazards and prepare a written risk assessment. The employer must review the assessment where there has been a significant change in the matters it covers or there is another reason to believe it is no longer valid. Section 19 of the 2005 Act.
Take the example of a reception being turned into a waiting area. The proposed furniture may match the existing chairs, but the new arrangement could put a row of seats in the path of an opening door. Checking the layout and who uses the room can resolve that problem at the specification stage, while the positions and quantities can still be changed.
What Does a Fire Test Report Actually Establish?
A fire test report identifies the specimen, the ignition source and the result under the stated test conditions. Begin with the description of the specimen. A report described as a fabric test may cover a particular upholstery fabric laid over a particular filling. The same fabric name can appear on chairs made with different fillings.
One example is I.S. EN 1021-1:2014. This Irish Standard sets out a method for testing how a combination of materials used in upholstered seating responds to a smouldering cigarette. A result for a cover and filling tells management about that combination under the conditions of the test. To apply it to a purchase, the supplier needs to connect the construction tested with the chair offered. NSAI catalogue entry and scope for I.S. EN 1021-1:2014.
A supplier may instead name BS 5852:2006. This British Standard describes methods that can be used on combinations of materials or on complete seating with specified ignition sources. Ask which method and ignition source the report records. A certificate that gives only the standard number leaves the buyer unable to compare the result with the agreed specification. BSI description of BS 5852:2006.
These questions can go directly into a request for quotation.
- Which model and upholstery option is included in the price?
- What cover, filling and any interliner are identified in the supporting report?
- Which standard, edition and ignition source did the laboratory use, and what result did it report?
- Was the specimen a combination of upholstery materials or a complete seat?
- Where the product code differs from the one in the report, how does the manufacturer establish that the result applies to the quoted chair?
- What restrictions on use, care, repair or substitution should be passed to the person managing the furniture?
A difference in names can have a simple explanation. A retailer may use its own stock code for a manufacturer's model. Ask for a written cross-reference and check that it includes the upholstery option on the order. If the evidence concerns a different construction, ask for evidence that covers the one being supplied. The age of a report is only one consideration. Its scope, changes to the product and the edition required by the specification also matter.
What Sequence Should Management Follow Before Buying Furniture?
Start with the room and its occupants. Agree a specification, match the supplier's evidence to the proposed item, then check the delivery and final layout. Keep the records with the furniture throughout its use. The six steps below can be incorporated into an existing purchasing procedure.
1. Establish Where and How the Furniture Will Be Used
Record the proposed room, the type and quantity of furniture, the people using it and the activities taking place nearby. Consider sleeping accommodation, smoking arrangements, heating equipment and any other relevant ignition sources.
Identify whether people can respond independently to an alarm or will need assistance. A furnishing decision in a staffed daytime office may involve different considerations from one in a residential care setting at night.
Include the proposed position on the room layout. The purchase should not introduce an obstruction to an escape route, interfere with a door or undermine the arrangements already described in the fire strategy.
2. Agree the Performance Specification Before Seeking Quotations
Use the fire risk assessment, relevant premises requirements and applicable sector guidance to establish the evidence required. Where specialist advice is needed, obtain it before selecting a product.
The specification should be clear enough for different suppliers to answer the same question. "Suitable for a nursing home" or "contract quality" may describe an intended market, but neither phrase identifies a fire test, a result or the construction covered.
Record the decision and who made it. This helps prevent a later substitution being accepted solely because the colour, dimensions and price are similar.
3. Obtain Evidence for the Proposed Product
Request the product identification, relevant test evidence, supplier confirmation of its applicability and instructions for use and maintenance. Keep the documents together so that the connection between the order and its supporting evidence remains visible.
Where a supplier provides a report for a fabric, ask how it supports the complete proposed construction. If another filling or interliner is offered, seek confirmation that the evidence covers that variation.
A quotation can make a change difficult to spot if it lists only the upholstery colour. Ask for the relevant material codes on the accepted schedule. If the proposed finish is one of several options shown in a catalogue, identify the option being ordered so the person checking delivery has something definite to compare.
4. Check That the Delivered Items Match the Approved Order
Compare the delivery with the agreed model, materials and relevant product identifiers. Retain supplied labels and instructions. Photograph identification labels where that will help maintain the record.
If the item or specification has changed, refer it back to the person responsible for the decision. A delivery note saying "equivalent" does not itself explain whether the fire-performance evidence remains applicable.
Check condition as well as identity. A torn cover with exposed filling needs a decision before the item is placed in use. If one chair in a batch has a different label, record which chair it is, retain the delivery details and ask the supplier to resolve that discrepancy. A single photograph of a correctly labelled chair cannot answer for a different one.
5. Install the Furniture in the Assessed Location
Confirm the layout, access and escape arrangements after the furniture is in place. Consider the combination of furniture, cushions, throws and other additions, rather than checking the principal item in isolation.
Staff who move furniture or manage the room should understand any restrictions. A documented decision loses value if the item is later placed beside a heat source or moved into a circulation space without considering the effect.
Where changes affect the fire risk assessment, update the assessment and communicate the resulting controls.
6. Maintain the Evidence and Review Changes
Follow the manufacturer's care instructions and arrange proportionate condition checks. Record damage, repairs, changes of use and replacement decisions.
Reupholstery needs particular care. Changing the cover, filling or interliner may take an item outside the construction described in its original evidence. Confirm the basis for the refurbished item before relying on the earlier report.
Keep responsibility clear across purchasing, facilities and the person managing fire safety. The record should show what was bought, why it was selected, where it is used and what needs to be maintained.
An entry in an existing asset register may be sufficient. Record the room, model and order reference, link the agreed specification to the report, and name the person who checked the match. Keep the care instructions where staff and contractors can find them. If the supplier owes a clarification, record the question, who is following it up and what has been agreed about use in the meantime.
What Should Nursing Homes and Other Designated Centres Consider?
In a designated centre for older people, suitable bedding and furnishings are an express duty of the registered provider under regulation 28(1)(a) of S.I. No. 415/2013. When choosing a resident's chair or replacing seating in a shared lounge, the provider needs a basis for deciding that the furniture is suitable for that use. The regulation specifies suitability and leaves the choice of an appropriate specification to be established for the setting. Health Act 2007 (Care and Welfare of Residents in Designated Centres for Older People) Regulations 2013, regulation 28.
HIQA's guidance for designated centres gives practical examples. Its Fire Safety Handbook advises using furnishings with appropriate flame resistance, retaining labels, following the manufacturer's care instructions and checking upholstered furniture for tears or exposed filling. It also advises a fire risk assessment when residents or children bring personal furniture into a centre. HIQA Fire Safety Handbook, version 1.2, March 2025, pages 78-79.
A resident may wish to bring a familiar armchair on admission. Involve the resident in discussing where it will go. Check the chair's condition and any identification, consider nearby heat or ignition sources and see how staff would assist the resident in that room. If there is a torn cover or the original label is missing, record that specific issue and what can be done about it.
That gives the resident, staff and management a clear reason for the decision and an action to revisit if the chair is repaired or more information becomes available.
Should Existing Furniture Now Be Replaced?
A replacement decision should follow the evidence and the assessment of the particular item. The July revocation does not, by itself, demonstrate that existing furniture is unsafe.
Start with an inventory of the items relevant to the assessment. Locate available product details and test evidence, check condition and confirm where each item is used. Prioritise identified concerns, such as damaged upholstery, a change of use or uncertainty about furniture in a higher-risk location.
Where evidence is missing, record the gap and make a proportionate decision about further enquiries, competent advice and any necessary interim controls. Do not turn an absence of paperwork into an unsupported claim that the item passed or failed a particular test.
An existing supplier may be able to identify a product from its label, order reference or batch information. If that cannot be done, the uncertainty remains part of the assessment. Replacing an item may be appropriate, but the replacement should go through the same evidence-based selection process.
How Would This Work for a Proposed Lounge Refurbishment?
Consider a hypothetical purchase for a shared lounge. The supplier prices an armchair in a wipe-clean blue finish and sends an ignitability report. The model name matches the quotation. On the report's specimen schedule, however, the cover is a woven fabric. Both finish options appear in the manufacturer's catalogue.
The purchaser can now ask a precise question. Which report, or documented assessment of its applicability, covers the wipe-clean cover with the filling on this order? If the supplier can identify the relevant construction and provide evidence that satisfies the agreed specification, management can record that basis and place the order. If the question remains open, the purchaser can hold that option or ask the supplier to quote for the evidenced construction.
When the chairs arrive, the person receiving them can check the model, finish and order reference against the accepted schedule. Facilities staff can then confirm the final layout with the lounge in its normal use, including when staff are assisting someone out of a chair. If a chair later needs a replacement cover, the original schedule gives the repairer the material reference and gives management a way to check the proposal before the repair goes ahead.
What Questions Commonly Cause Confusion?
Does the Description "Fire Retardant" Mean a Chair Cannot Burn?
A description on a quotation gives no reliable prediction of how the chair will behave in a room fire. Ask which ignition source was used, what construction was tested and what result was recorded. Those details allow management to judge whether the evidence answers the question in the purchasing specification.
Does Every Irish Nursing Home Chair Need a "Crib 5" Certificate?
Neither the July revocation instrument nor regulation 28(1)(a) sets that universal requirement. A particular project or purchasing specification may require evidence of performance against a specified ignition source. If a tender asks for "Crib 5", ask the person setting the requirement to identify the test method, ignition source and result required for that seating. Suppliers can then quote against the same requirement.
Can Management Keep Using a Chair If the Label Is Missing?
The missing label is an evidence gap. Look for the order, model reference, product photographs or supplier records and check the item's condition and location. A missing label and exposed filling present different questions. The former affects identification. The latter is an observable defect that warrants a decision about repair, replacement or use pending assessment.
What If the Same Chair Is Offered in a Different Finish?
Ask for evidence that covers the finish being offered with the proposed filling and construction. Have the person who agreed the specification assess the change before accepting it. Record the accepted option against the order so a later buyer can see exactly which version was checked.
How Can Phoenix STS Help?
Phoenix STS provides fire risk assessments and fire engineering consultancy for organisations in Ireland. For a question about proposed seating, identify the premises, the room and its occupants. Include the supplier's specification and the evidence available for that product so the enquiry can be considered in context. Contact Phoenix STS.
For further practical guidance on fire safety, training and safety management, subscribe to the Phoenix STS newsletter.
Important Note
This article is provided for general information only. It is not legal advice and does not replace a site-specific fire safety, health and safety, training or professional assessment for a particular premises, organisation or care setting.
The examples illustrate purchasing decisions. An assessment of a particular item requires its specification, the relevant test evidence and consideration of its intended use and location. Management is advised to consult a competent person where the evidence or the required performance is unclear.
Related Articles

Guidance for Irish nursing homes on smoking, lighters, the rights of residents, smoking aprons, supervision, fire risk assessment and HIQA expectations.

Review of the HIQA Fire Safety Handbook 2025 for designated centres, with guidance on clothing fires, fire blankets, extinguishers and staff training.

Understand how risk assessments, a risk register, a safety policy and the signed declaration fit into an Irish workplace safety statement and its review.
